English

Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.

Igwe Ịkpụ Osisi Rotary Laser dị Elu nke Ebubatara Lens na Enyo Igwe Ịkpụ Laser maka Akara na Co2 Glass Sealed Laser Tube Foto a na-egosipụta
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.
  • Igwe Ịkpụ Osisi Rotary Laser dị elu nke e si na Lens na Enyo bubata, Igwe Ịkpụ Osisi Laser maka Akara ya na Tube Laser nke e ji iko kpuchie, nke nwere CO2.

Nkọwa Dị Mkpirikpi:

Uru nke igwe ịkpụ laser co2 nke die board

A na-ejikarị igwe ịkpụ laser CO2 ọkachamara maka ịkpụ osisi anwụ 20-25mm eme ihe.

Igwe Ịcha Laser Co2 Ọkachamara Maka Ịkụnye Nku bụ ọkachamara n'ịkpụ osisi ọnwụ ruo 20mm-25mm, yana arụmọrụ dị elu, mma dị mma, obere mmezi na ọnụ ahịa ọsọ dị ala, ọ dabara adaba maka nkwakọ ngwaahịa, ụlọ ọrụ mgbasa ozi.

1. Ọkpọkọ laser co2 a ma ama nke China, nwere ike ịhọrọ 150W 180W 300W 600W.

2. Lensi reflector, lensi na-elekwasị anya, isi lesa na tube laser niile dị na mmiri ma nwee ike ịrụ ọrụ nke ọma ruo ogologo oge.

3.Taiwan PIM ma ọ bụ HIWIN linear guideway.

4. Nhazi dị elu: Sistemụ njikwa Ruida 6445, draịvụ Lead shine, ọkọnọ ike laser ama ama, wdg.

5. Enwere ike iji igwe ịkpụ plywood bee obosara nke 15MM. 18MM. 20MM. 25MM. Igwe ịkpụ plywood, dịka 0.45, 0.711.05, 1.42 wdg. Kerf, nke na-agbanwe agbanwe site n'elu ruo ala. Ozugbo agbanyere ya, igwe ahụ nwere ike ịrụ ọrụ na-enweghị oge ichere.

6. Osisi ahụ na-eji ikuku eme ka ọ dị ka laser, ọ naghịkwa achọ ka igwe ịkpụ plywood zụta gas ọ bụla ọzọ na-anaghị arụ ọrụ, nke a mere ka ọnụ ahịa ọrụ ndị ọrụ belata nke ukwuu.

7.Ọrụ ọrụ dị mfe, nkwalite nhọrọ na igwe ịkpụ laser ígwè na nke na-abụghị ígwè, nwere ike iji ígwè anaghị agba nchara ịkpụ oxygen.


Budata ya dị ka PDF

Nkọwa Ngwaahịa

Akara Ngwaahịa

Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2

Lensị Isi Enyo Mmiri Na-ajụ Ọkụ

Igwe ịkpụ laser CO2 nke di n'elu osisi

Ọkpọkọ laser CO2 nke e mechiri emechi (JOYLASER)

Igwe ịkpụ laser CO2 nke di n'elu osisi

Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2

Ikpo okwu ọrụ

Tebụl ọrụ mma aluminum ma ọ bụ mmanụ aṅụ

Sistemụ njikwa RUIDA 6445GCONTROLS

Igwe ịkpụ laser CO2 nke di n'elu osisi

Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2

SOFTWỌRỤ

Ngwanrọ na ngwanrọ ndị a na-akwado

Ụgbọ okporo ígwè nduzi ahịrị

Tinye ihe mgbochi anọ nke e si mba ọzọ bịa. Ọ na-adịgide adịgide ma na-adịgide adịgide.

Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2

Nri n'ihu na n'azụ

Ogologo ihe nhazi kachasị elu.

Nkọwapụta

Usoro Nkà na ụzụ
Usoro Nkà na ụzụ
Ụdị nlereanya FST-1610
Nsogbu mmanụ aṅụ ma ọ bụ aluminom
Ebe a na-akpụ ihe 1600x1000mm
Ike laser 300w/600w
Ọsọ nka 0~60000mm/min
Ọsọ Mbelata 0 5000mm/min
Mkpụcha Omimi (Acrylic) 0 30mm (acrylic)
Tebụl ọrụ elu na ala Elu na ala 550mm enwere ike ịgbanwe
Agwa Nhazi Kachasị Obere 1 X 1mm
Oke Mkpebi 0.0254mm (1000dpi)
Ịnye ọkụ 220V (orll0V)4./-10% 50Hz
Ịtọgharị ọnọdụ Izi ezi erughi ma ọ bụ hà nhata O.01mm
Ihe mmetụta na mkpu na-echebe mmiri Ee
Okpomọkụ Ọrụ 0-45°C
Iru mmiri na-arụ ọrụ 35-70°C
Akwadoro Usoro Eserese PLT/DXF/BMP/JPG/GIF/PGN/T1F
Sistemụ Ọrụ Windows XP/VISTA/Windows 7/8/10
Ngwanrọ RDWorks/LaserCAD/AotuCAD
Nhazi njikwa DSP
Mmiri oyi (Ee/Mba) Ee
Oke Elu Ihe Ndị A Ga-eji Kpuo (mm) 120mm
Ọdụdọ Laser Akpọchiri CO2 iko laser tube
Akụkụ igwe 2150x1560x1050(mm)
Nha ngwugwu 2270x1700x1240mm
Mkpokọta nha 500kg
Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2
Igwe ịkpụ laser 1610 CO2
  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a zitere anyị ya

    Ngwaahịa dị iche iche

    Pịa "Enter" iji chọọ ma ọ bụ "ESC" iji mechie